| Previous topic :: Next topic |
$$$$
Joined: 15 Apr 2006
Posts: 3
|
| Posted: Sat 15 Apr, 2006 5:47 am Subject: flash with 1/100 or 1/200 |
 |
|
I am shortly to begin a project. As a subsitute for a Human model moving, I tested with a fan on a stand to test motion capture. I have the flash set 2 meters from the subject and the (Digital) camera is approx 8-10 meters from the subject. on 100asa and 1/100th sec as expected the fan blades motion is frozen by the flash, but if I set the camera to 1/200th of a sec the fan blades are quite blury because of the motion. Not a problem, I was just curious why this should happen.
<3 $ |
|
|
|
 |
$$$$
Joined: 15 Apr 2006
Posts: 3
|
| Posted: Sat 15 Apr, 2006 2:06 pm Subject: |
|
|
Never mind about this, I have since taken sharp fan shots at 1/200th. but cant seem to replecate the blury fan blades. (not that it mattered any way)
$ |
|
|
|
|
nkg
Site Admin
Joined: 18 Jun 2005
Posts: 771
Location: London, UK
|
| Posted: Tue 18 Apr, 2006 1:01 am Subject: |
|
|
| Is your camera using FP mode flash? |
|
|
|
|
$$$$
Joined: 15 Apr 2006
Posts: 3
|
| Posted: Tue 18 Apr, 2006 6:44 am Subject: |
|
|
| could have been, Im going to test again tonignt to see if this is what was causeing it. |
|
|
|
|
|
